Cordless Drill & Driver
| Model / Type | EY7450LJ2S | EY7450X |
|---|---|---|
| Voltage | 18V | 18V |
| Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | * |
| Charging time (usable / full) | 65 / 80min. | * |
| Speed at no load in rpm | low 50 – 430 high 160 – 1.650 |
* |
| Max. torque (stalling / instant torque) | 40 / 57Nm | * |
| Clutch torque | 1.0 – 6.9Nm | * |
| Clutch stages | 18 + drill position | * |
| Max. drilling diameter (in wood / in metal) | 36 / 13mm | * |
| Max. holesaw size (in wood / in metal) | 65mm / - | * |
| Size (W x L x B) | 63 x 218 x 248mm | * |
| Weight (incl. battery) | 2.15kg | * |
| Standard accessories | 2 x battery EY9L54B charger EY0L82B incl. plastic box |
without battery without charger without plastic box |
* X-type (EY7450X) without battery and charger.
| Battery capacities | |||
|---|---|---|---|
| Voltage | 18V | ||
| Model | EY7450LJ2S | ||
| Battery | EY9L51B(LJ) | ||
| Screwing | Wood screws in yellow pine* | Ø 4.1mm x 25mm | 940pcs |
| Wood screws in yellow pine** | Ø 8mm x 80mm | 320pcs | |
| Self-drilling screws in SPC* | Ø 3mm x 13mm t = 1.2mm | - | |
| Self-drilling screws in SPC* | Ø 4mm x 13mm t = 1.6mm | 1000pcs | |
| Drilling | Holes in plaster board + Plywood/wooding core* | Plaster board 12.5mm + Plywood 12mm Ø 68mm × 24.5mm |
85pcs |
| Holes in plaster board + Plywood** | Plaster Board 12.5mm + Plywood 12mm Ø 125mm × 24.5mm |
35pcs | |
| Holes in SPC* | Ø 13mm t = 1.6mm | 300pcs | |
| Holes in SPC/hole saw* | Ø 21mm t = 1.6mm | 45pcs | |
| Holes in SPC/hole saw** | Ø 33mm t = 1.6mm | 45pcs | |
| Holes in yellow pine* | Ø 18mm x 120mm | 140pcs | |
| Holes in yellow pine** | Ø 30mm x 40mm | 170pcs | |
| * High mode ** Low mode | |||
Capable of very heavy duty drilling and producing 57Nm of torque but still lightweight (2.15kg incl. battery).
Even during high workloads, the 4-brush motor maintains power without losing speed reducing the possibility of motor burn-out by delivering continuous operation under load.
The Tough Tool IP* concept includes features such as sensors which monitor batteries and protect against overheating and ‘over-discharge’. This technology ensures reliable, safe and powerful operation for the user.
1: Switch
Increased sealing helps protect against water and dust.
2: Electronics
The electronic circuits in control panel and battery pack are covered by a urethane layer for added dust and water protection.
3: Battery
The battery cells are designed to avoid intrusion of moisture.
*IP=INTELLIGENT POWER TOOL
Delivery Info
Cordless Drill & Driver
| Model / Type | EY7450LJ2S | EY7450X |
|---|---|---|
| Voltage | 18V | 18V |
| Battery capacity accord. to IEC (technology) | 5.0Ah (Li-ion) | * |
| Charging time (usable / full) | 65 / 80min. | * |
| Speed at no load in rpm | low 50 – 430 high 160 – 1.650 |
* |
| Max. torque (stalling / instant torque) | 40 / 57Nm | * |
| Clutch torque | 1.0 – 6.9Nm | * |
| Clutch stages | 18 + drill position | * |
| Max. drilling diameter (in wood / in metal) | 36 / 13mm | * |
| Max. holesaw size (in wood / in metal) | 65mm / - | * |
| Size (W x L x B) | 63 x 218 x 248mm | * |
| Weight (incl. battery) | 2.15kg | * |
| Standard accessories | 2 x battery EY9L54B charger EY0L82B incl. plastic box |
without battery without charger without plastic box |
* X-type (EY7450X) without battery and charger.
| Battery capacities | |||
|---|---|---|---|
| Voltage | 18V | ||
| Model | EY7450LJ2S | ||
| Battery | EY9L51B(LJ) | ||
| Screwing | Wood screws in yellow pine* | Ø 4.1mm x 25mm | 940pcs |
| Wood screws in yellow pine** | Ø 8mm x 80mm | 320pcs | |
| Self-drilling screws in SPC* | Ø 3mm x 13mm t = 1.2mm | - | |
| Self-drilling screws in SPC* | Ø 4mm x 13mm t = 1.6mm | 1000pcs | |
| Drilling | Holes in plaster board + Plywood/wooding core* | Plaster board 12.5mm + Plywood 12mm Ø 68mm × 24.5mm |
85pcs |
| Holes in plaster board + Plywood** | Plaster Board 12.5mm + Plywood 12mm Ø 125mm × 24.5mm |
35pcs | |
| Holes in SPC* | Ø 13mm t = 1.6mm | 300pcs | |
| Holes in SPC/hole saw* | Ø 21mm t = 1.6mm | 45pcs | |
| Holes in SPC/hole saw** | Ø 33mm t = 1.6mm | 45pcs | |
| Holes in yellow pine* | Ø 18mm x 120mm | 140pcs | |
| Holes in yellow pine** | Ø 30mm x 40mm | 170pcs | |
| * High mode ** Low mode | |||
Capable of very heavy duty drilling and producing 57Nm of torque but still lightweight (2.15kg incl. battery).
Even during high workloads, the 4-brush motor maintains power without losing speed reducing the possibility of motor burn-out by delivering continuous operation under load.
The Tough Tool IP* concept includes features such as sensors which monitor batteries and protect against overheating and ‘over-discharge’. This technology ensures reliable, safe and powerful operation for the user.
1: Switch
Increased sealing helps protect against water and dust.
2: Electronics
The electronic circuits in control panel and battery pack are covered by a urethane layer for added dust and water protection.
3: Battery
The battery cells are designed to avoid intrusion of moisture.
*IP=INTELLIGENT POWER TOOL
English
Latviešu
Русский
